19מאי
מצאו את הפרוב המתאים לכם
פרובים מכל הסוגים
מתאימים לכל החברות
פרובים מכל הסוגים
Placeholder for ajax description replacement
PCB ADAPTER 2.5 HQ
- High-quality adapter for spring-loaded probe tips
- Nickel-plated brass shell with gold-plated socket
- PTFE insulation for high reliability
- Rated 250 V input, 1600 V pulse
- Minimum 1.25 mm pad spacing required
High Speed Pulse Generator USB FastEdge®
-
The Fedge® is a compact, USB-powered fast edge signal generator, about the size of a USB stick.
-
It delivers a very square and flat -500 mV pulse with a rapid 32 ps edge.
-
This pulse has no overshoot or undershoot, making it ideal for verifying instrument and probe rise/fall times.
-
Features single-button operation for selecting different operating modes.
-
Can be used for bandwidth measurements, TDR measurements, and even EMV tests.
High Voltage Probe Calibration Generators KHT 6000C
- The KHT 6000C is a calibration generator specifically designed for HF adjustment of high voltage probes and dividers.
- It generates square pulses with a voltage range of 500V to 6000V, adjustable in 1V steps.
- The device features a steep rising edge with a rise time of less than 45ns (10% to 90%).
- Users can operate the KHT 6000C manually or remotely via a PC using the integrated USB or optional GPIB interface.
- Key specifications include a voltage display resolution of 1V and a maximum load of 100pF.
3D Positioners MSA 100
- Hands-Free Testing Enables hands-free operation for more efficient testing procedures.
- 200mm Span Width Features a 200mm span width for versatile positioning.
- Steelbase Includes a stable steel base for secure mounting.
- 3D Stepless Clamping System Offers a stepless adjustable clamping system for precise positioning.
- Operating Range Functions within a temperature range of 0°C to +50°C.
Wide-Band AC Current Transformers 13E1000
- Wide-band current transformer with over 60 MHz bandwidth and 1000 A current rating
- Delivers 1 mV/A output sensitivity with < 2% accuracy and rise time under 6 ns
- Low insertion inductance of 300 nH and excellent DC saturation tolerance up to 2000 A
- Features integrated 50 Ω termination and BNC (male) output connector for easy connection
- Compact and robust design with 21 mm aperture, 1.5 m cable, and galvanic isolation
Coil Current Probes SS-280A / A-H
- Model SS-280A / A-H features a Rogowski coil design for AC current measurement
- Hard-shell A-H version offers enhanced mechanical protection
- Provides a linear voltage output signal proportional to the measured current
- Supports wide bandwidth and high-frequency current waveforms
- Designed for use in tight installation spaces and electrical panels
Ultra-Fast Current UFCS-R001
- It is an ultra-fast current shunt with a resistance of 1 mΩ.
- It has an SMA (F) output connector.
- It is designed for measuring current.
- It has an insertion inductance of <200 pH.
- It is available as a single piece or in packs of 10 or 25.
AC/DC Current Probes SS-520
- It is a current probe designed for micro-current measurements.
- It is ideal for ultra-low 1mA order current waveforms.
- It has a maximum current of 5Arms and a bandwidth of DC ~ 50MHz.
- With a high-resolution oscilloscope, it can measure 100µA step currents.
- It is part of a series (SS-520, SS-521, SS-530, SS-531) that provides low noise and accurate small current measurements.
Passive Probes PML 701
- It is a 1:1 passive probe.
- It has a system bandwidth of 38 MHz and a rise time of 9 ns.
- The system's input resistance is 1 MΩ (Scope Input), and the input capacitance is 39 pF + Scope.
- It is designed for use with a measuring instrument with 1MΩ AC/DC input coupling.
- The probe is light, weighing only 43g, and has a cable length of 1.3m and a probe tip diameter of 2.5mm
High Voltage Passive Probes PHV 1000-O
- It is a high-voltage probe designed for use with the OMICRON Lab Bode 100 vector network analyzer.
- It has a maximum input voltage of 2000V peak.
- It features a 100:1 attenuation ratio.
- The system has an input resistance of 50 MΩ and an input capacitance of 7.5 pF.
- It comes with accessories for easy adaptation to the device under test (DUT).
High Voltage Passive Probes HV-P30A
- It is a high voltage passive probe designed for high voltage measurements.
- It has an attenuation ratio of 1000:1.
- The maximum DC input voltage is 30 kV, and the maximum frequency band voltage is 40 kV.
- It has a system bandwidth of 50 MHz.
- It is intended for use in a protected test environment and is not designed for handheld use.
High Voltage Passive Probe PHV 1000
- It is a high voltage passive probe. This means it's designed to measure high voltages without needing its own power source, relying on the signal from the circuit it's testing.
- It has an attenuation ratio of 100:1. This indicates that the probe reduces the input voltage to 1/100th of its actual value, allowing standard oscilloscopes to measure high voltages safely. The attenuation ratio has an accuracy of ±2% at DC.
- It has a system bandwidth of 120 MHz. This specifies the frequency range over which the probe can accurately measure voltage signals. It also has a rise time of 2.4 ns.
- The input resistance is 50 MΩ. This high input resistance minimizes the loading effect on the circuit being measured, ensuring accurate readings. The input capacitance is 9.5 pF.
- It is designed for use with a measuring instrument having an input coupling of 1 MΩ AC/DC. This defines the input impedance that the measuring instrument (typically an oscilloscope) should have for the probe to function correctly.
Placeholder for ajax description replacement
