19מאי
מצאו את הפרוב המתאים לכם
פרובים מכל הסוגים
מתאימים לכל החברות
פרובים מכל הסוגים
Placeholder for ajax description replacement
Camera Adapter 1/4" to M6 (SW 13mm)
- The Camera Adapter is designed to mount cameras with a 1/4" thread.
- It has an M6 thread for mounting on the SKID® positioning systems.
- The adapter features a hex socket (SW 13mm).
- Used to securely attach cameras and other equipment with a 1/4" thread to the SKID® systems.
- Facilitates the use of cameras and other compatible equipment with the SKID® positioning systems.
Clamb Lever V2A
- Clamb Lever V2A made from corrosion and acid-resistant V2A stainless steel
- Designed for single-handed operation
- Used as a component within the PMK SKID® positioning system
- Operates reliably across a wide temperature range from -55°C to +155°C
- Durable and reliable for clamping applications in various testing and measuring environments
Coil Current Probes SS-280A / A-H
- Model SS-280A / A-H features a Rogowski coil design for AC current measurement
- Hard-shell A-H version offers enhanced mechanical protection
- Provides a linear voltage output signal proportional to the measured current
- Supports wide bandwidth and high-frequency current waveforms
- Designed for use in tight installation spaces and electrical panels
EMC Noise Suppression Kit
- Accessory for BumbleBee® high-voltage differential probes
- Designed for use in EMI-heavy environments
- Helps suppress noise and improve measurement accuracy
- Includes three ferrites for effective interference reduction
- Supplied with an opening key for easy installation
High Impedance Active Probe Sonic® 4000 RF
- High-Frequency Probe The Sonic 4000 RF active probe is designed for high-frequency in-circuit measurements, with a bandwidth of 220 Hz to >4 GHz.
- Input Impedance It features a high input impedance of 2MΩ in parallel with <0.6pF, minimizing circuit loading.
- Output The probe's output signal has no DC component.
- Safe Probing It has a high impedance probe tip reference connection (1MΩ to earth ground) for safe in-circuit browsing and to prevent short circuits.
- Applications It is ideal for use with spectrum, network, and RF analyzers, as well as other 50Ω measurement systems.
High Impedance Active Probe Tetris® 1000
-
1 GHz Bandwidth for accurate high-frequency signal measurements
-
±8 V Dynamic Range supports a wide range of signal levels
-
High Input Impedance of >1 MΩ with low 0.9 pF capacitance for minimal circuit loading
-
10:1 Attenuation Ratio ensures safe signal scaling for sensitive instruments
- Compact and Lightweight with 1.3 m cable and BNC output for universal oscilloscope compatibility
High Speed Pulse Generator USB FastEdge®
-
The Fedge® is a compact, USB-powered fast edge signal generator, about the size of a USB stick.
-
It delivers a very square and flat -500 mV pulse with a rapid 32 ps edge.
-
This pulse has no overshoot or undershoot, making it ideal for verifying instrument and probe rise/fall times.
-
Features single-button operation for selecting different operating modes.
-
Can be used for bandwidth measurements, TDR measurements, and even EMV tests.
High Voltage Differential Probe BumbleBee®±2000V, 2m
- High Voltage Differential Probe – Designed for measuring high voltage differentials, up to ±2000V.
- 2m Cable Length – Comes with a 2-meter cable for flexible measurement setups.
- Adjustable Attenuation – Offers four selectable input attenuation ranges (500:1, 250:1, 100:1, 50:1) to optimize the signal for the best resolution.
- Wide Bandwidth – Supports bandwidth up to 400 MHz (depending on attenuation setting).
- Universal BNC Output – Features a universal BNC output connector for compatibility with various oscilloscopes.
high voltage differential probe HORNET® ±4000V
- ±4000V differential and common mode input range for high-voltage applications
- Bandwidth exceeding 300MHz with rise times down to 1.0 ns
- Multiple attenuation ranges: 1000:1, 500:1, 200:1, 100:1
- Designed for integration into automated or manual test stations (not handheld)
- Compatible with oscilloscopes via universal BNC output, requires separate PMK power supply
High voltage optically isolated probe FireFly® SMA Input
- High Bandwidth – Offers a bandwidth greater than 1.5 GHz.
- Low Input Range – Designed for a low input voltage range of ±1V.
- High Input Impedance – Has an input impedance of 200 kΩ || 5.1 pF.
- Fast Rise Time – Features a rise time of less than 250 ps.
- High CMRR – Exhibits a high Common Mode Rejection Ratio (CMRR).
High Voltage Passive Probe PHV 1000
- It is a high voltage passive probe. This means it's designed to measure high voltages without needing its own power source, relying on the signal from the circuit it's testing.
- It has an attenuation ratio of 100:1. This indicates that the probe reduces the input voltage to 1/100th of its actual value, allowing standard oscilloscopes to measure high voltages safely. The attenuation ratio has an accuracy of ±2% at DC.
- It has a system bandwidth of 120 MHz. This specifies the frequency range over which the probe can accurately measure voltage signals. It also has a rise time of 2.4 ns.
- The input resistance is 50 MΩ. This high input resistance minimizes the loading effect on the circuit being measured, ensuring accurate readings. The input capacitance is 9.5 pF.
- It is designed for use with a measuring instrument having an input coupling of 1 MΩ AC/DC. This defines the input impedance that the measuring instrument (typically an oscilloscope) should have for the probe to function correctly.
High Voltage Passive Probes HV-P30A
- It is a high voltage passive probe designed for high voltage measurements.
- It has an attenuation ratio of 1000:1.
- The maximum DC input voltage is 30 kV, and the maximum frequency band voltage is 40 kV.
- It has a system bandwidth of 50 MHz.
- It is intended for use in a protected test environment and is not designed for handheld use.
Placeholder for ajax description replacement
