19מאי
מצאו את הפרוב המתאים לכם
פרובים מכל הסוגים
מתאימים לכל החברות
פרובים מכל הסוגים
Placeholder for ajax description replacement
Active Probe SAP2500
- Over 2.5 GHz bandwidth with ultra-low 1.1 pF input capacitance
- ±8 V dynamic range and ±12 V offset range for flexible signal capture
- 1 MΩ input resistance minimizes loading on test circuits
- Seamless integration with Siglent oscilloscopes via SAPBus interface
- Compact probe head and full accessory set for dense PCB probing
Differential Active Probe SAP2500D
- High-speed differential probe with over 2.5 GHz bandwidth for precision signal analysis
- Low 1 pF input capacitance and ±4 V dynamic range minimize circuit loading
- ±8 V offset range and <3% gain accuracy for accurate and stable measurements
- Compact 2.54 mm tip pitch ideal for probing dense PCBs and differential signals
- Seamless integration with SDS5000X/SDS6000A oscilloscopes via SAPBus interface
Differential Probe SAP5000D
- 5 GHz bandwidth and 80 ps rise time for high-speed signal analysis
- 20 kΩ differential input resistance with ultra-low 400 fF capacitance
- 10:1 attenuation ratio with ±2.5 V dynamic range and ±12 V offset range
- Powered via SAPBus interface — no external power required
- Ideal for high-speed debugging and validation with 130 cm cable length
High Impedance Active Probe Sonic® 4000 RF
- High-Frequency Probe The Sonic 4000 RF active probe is designed for high-frequency in-circuit measurements, with a bandwidth of 220 Hz to >4 GHz.
- Input Impedance It features a high input impedance of 2MΩ in parallel with <0.6pF, minimizing circuit loading.
- Output The probe's output signal has no DC component.
- Safe Probing It has a high impedance probe tip reference connection (1MΩ to earth ground) for safe in-circuit browsing and to prevent short circuits.
- Applications It is ideal for use with spectrum, network, and RF analyzers, as well as other 50Ω measurement systems.
High Impedance Active Probe Tetris® 1000
-
1 GHz Bandwidth for accurate high-frequency signal measurements
-
±8 V Dynamic Range supports a wide range of signal levels
-
High Input Impedance of >1 MΩ with low 0.9 pF capacitance for minimal circuit loading
-
10:1 Attenuation Ratio ensures safe signal scaling for sensitive instruments
- Compact and Lightweight with 1.3 m cable and BNC output for universal oscilloscope compatibility
High-Speed Differential Probe HSDP4010
- High Bandwidth Offers a bandwidth greater than 4 GHz, with 4.2 GHz typical.
- Differential Voltage Range Designed for a differential voltage range of ±8V (16Vpp).
- Low Noise Features low input-referred noise, less than 2 mV rms and 100 nV/sqrt(Hz) (preliminary).
- Fast Rise Time Has a rise time of less than 140 ps (preliminary).
- High CMRR Exhibits high Common Mode Rejection Ratio (CMRR) with >70 dB at DC, >50 dB at 1 MHz, >45 dB at 10 MHz, >35 dB at 100 MHz, >25 dB at 500 MHz and >25 dB at 1 GHz.
Oscilloscope Probe PB470
- Switchable 1X / 10X attenuation for flexible use
- Wide compatibility with standard 1 MΩ oscilloscope inputs
- Capable of measuring up to 300 V RMS in 10X mode
- High signal fidelity with low capacitance and broad compensation range
- Durable build with 130 cm cable length for practical use
- Lightweight design at 55 grams
Oscilloscope Probe PB830
- 300 MHz bandwidth for high-frequency signal analysis.
- 10:1 attenuation ratio for accurate voltage measurements.
- 10 MΩ input resistance minimizes signal loading.
- CAT II 400V rating for safe use on low-voltage circuits.
- Replaceable spring hook tip for easy maintenance.
Oscilloscope Probe PP215
- Bandwidth up to 200 MHz in 10X mode for high-frequency signal analysis
- Switchable 1X/10X attenuation for versatile measurement applications
- Compatible with oscilloscopes with 1 MΩ input impedance
- Wide compensation range from 10 pF to 35 pF ensures calibration flexibility
- Rugged 130 cm cable and robust design for lab and field use
Oscilloscope Probe PP430
- High-performance passive oscilloscope probe with 1X/10X attenuation switch
- 300 MHz bandwidth in 10X mode for accurate high-speed signal capture
- Compatible with 1 MΩ input impedance oscilloscopes
- Wide compensation range of 10–35 pF for optimal calibration
- Durable 130 cm cable and robust design ideal for lab and field use
Oscilloscope Probe PP510
- Switchable 1X / 10X attenuation for versatile signal probing
- Higher bandwidth than entry-level models — suitable for mid-speed signals
- Compatible with oscilloscopes featuring 1 MΩ input impedance
- Adjustable compensation range for matching probe to oscilloscope
- Robust construction with standard 130 cm cable length
- CAT II rated input voltage for safe use on typical lab signals
Oscilloscope Probes SP3050A
- 500 MHz bandwidth for accurate high-speed signal measurements
- 10X attenuation with 10 MΩ input impedance and 11 pF capacitance
- Rated for up to 400 V CAT II for safe voltage probing
- Compact and lightweight design, ideal for precision R&D work
- Compatible with oscilloscopes via standard BNC and 120 cm cable length
Placeholder for ajax description replacement
