19מאי
מצאו את הפרוב המתאים לכם
פרובים מכל הסוגים
מתאימים לכל החברות
פרובים מכל הסוגים
Placeholder for ajax description replacement
High Voltage Passive Probes PHV 1000-O
- It is a high-voltage probe designed for use with the OMICRON Lab Bode 100 vector network analyzer.
- It has a maximum input voltage of 2000V peak.
- It features a 100:1 attenuation ratio.
- The system has an input resistance of 50 MΩ and an input capacitance of 7.5 pF.
- It comes with accessories for easy adaptation to the device under test (DUT).
High Voltage Passive Probes PHVX4kV-2-0
- It's a passive high voltage probe designed for measurements in power electronics design.
- It has a maximum input voltage rating of 4000V DC / 4000V peak.
- It features a bandwidth greater than 600MHz and a 100:1 attenuation ratio.
- It comes with a 2.0m cable length.
- It does not include readout function or additional Silicon insulation.
High Voltage Probe Calibration Generators KHT 6000C
- The KHT 6000C is a calibration generator specifically designed for HF adjustment of high voltage probes and dividers.
- It generates square pulses with a voltage range of 500V to 6000V, adjustable in 1V steps.
- The device features a steep rising edge with a rise time of less than 45ns (10% to 90%).
- Users can operate the KHT 6000C manually or remotely via a PC using the integrated USB or optional GPIB interface.
- Key specifications include a voltage display resolution of 1V and a maximum load of 100pF.
High-Speed Differential Probe HSDP4010
- High Bandwidth Offers a bandwidth greater than 4 GHz, with 4.2 GHz typical.
- Differential Voltage Range Designed for a differential voltage range of ±8V (16Vpp).
- Low Noise Features low input-referred noise, less than 2 mV rms and 100 nV/sqrt(Hz) (preliminary).
- Fast Rise Time Has a rise time of less than 140 ps (preliminary).
- High CMRR Exhibits high Common Mode Rejection Ratio (CMRR) with >70 dB at DC, >50 dB at 1 MHz, >45 dB at 10 MHz, >35 dB at 100 MHz, >25 dB at 500 MHz and >25 dB at 1 GHz.
Holder for Probes 5-12mm
- Versatile holder for probes sized 5mm to 12mm
- Designed for SKID® positioning systems
- Included in some SKID Starter Kits (SKID-M, SKID-L)
- Enables precise probe positioning for testing and debugging
- Durable accessory to enhance SKID® system functionality
Interface power supply push/pull 1.5m
- 1.5 m interface cable for PMK active probes
- Reliable connection to compatible power supplies
- Push/Pull connector design for quick and secure attachment
- Durable high-quality construction for long-term use
- Provides flexibility and stable power delivery in test setups
Non-sellable single item of spring tip set
- Single spring tip from the PMK set, not sold individually
- Gold-plated for enhanced durability and reliable conductivity
- Fine tip suitable for precision and delicate tasks
- Intended as a replacement or spare for the full set
- Compatible with PMK soldering and testing tools
Optional probe single case in black with foam inlay for transport and storage Case BumbleBee
- Optional single probe case for BumbleBee series
- Durable black exterior for long-lasting use
- Foam inlay provides secure protection
- Compact and lightweight for easy transport
- Ideal for safe storage and professional mobility
Passive High-Temperature Probe ENVI® 4.5MΩ
- It's a passive probe designed for environmental testing and use in climatic chambers within a wide temperature range of -55°C to +155°C.
- It features a 10:1 attenuation ratio, a 350 MHz bandwidth, and a 400V input voltage range.
- The probe has a BNC connector with a read-out function for universal connectivity to oscilloscopes with BNC input, enabling direct voltage measurement display.
- It is suitable for a variety of applications due to its high temperature range and voltage input capabilities.
- It has an input resistance of 4.5 MΩ and an input capacitance of 20 pF.
Passive Probe MMCX-P0725
- Passive Probe – It's a passive probe designed for high-fidelity measurements.
- High Bandwidth Offers a bandwidth of >700 MHz.
- Low Capacitive Loading Features a low input capacitance of <4 pF.
- Attenuation Ratio Has an attenuation ratio of 25:1.
- Universal Output Includes a universal BNC output connector for compatibility with various oscilloscopes.
Passive Probes PML 701
- It is a 1:1 passive probe.
- It has a system bandwidth of 38 MHz and a rise time of 9 ns.
- The system's input resistance is 1 MΩ (Scope Input), and the input capacitance is 39 pF + Scope.
- It is designed for use with a measuring instrument with 1MΩ AC/DC input coupling.
- The probe is light, weighing only 43g, and has a cable length of 1.3m and a probe tip diameter of 2.5mm
PCB Adapter 2.5
- Basic adapter for use with spring-loaded probe tips
- Made from nickel-plated spring steel for durability
- Rated for 250 V input voltage
- Handles up to 1600 V pulse
- Requires minimum solder pad spacing of 1.25 mm
Placeholder for ajax description replacement
