19מאי
מצאו את הפרוב המתאים לכם
פרובים מכל הסוגים
מתאימים לכל החברות
פרובים מכל הסוגים
Placeholder for ajax description replacement
High Voltage Passive Probes HV-P30A
- It is a high voltage passive probe designed for high voltage measurements.
- It has an attenuation ratio of 1000:1.
- The maximum DC input voltage is 30 kV, and the maximum frequency band voltage is 40 kV.
- It has a system bandwidth of 50 MHz.
- It is intended for use in a protected test environment and is not designed for handheld use.
High Voltage Passive Probes PHV 1000-O
- It is a high-voltage probe designed for use with the OMICRON Lab Bode 100 vector network analyzer.
- It has a maximum input voltage of 2000V peak.
- It features a 100:1 attenuation ratio.
- The system has an input resistance of 50 MΩ and an input capacitance of 7.5 pF.
- It comes with accessories for easy adaptation to the device under test (DUT).
High Voltage Passive Probes PHVX4kV-2-0
- It's a passive high voltage probe designed for measurements in power electronics design.
- It has a maximum input voltage rating of 4000V DC / 4000V peak.
- It features a bandwidth greater than 600MHz and a 100:1 attenuation ratio.
- It comes with a 2.0m cable length.
- It does not include readout function or additional Silicon insulation.
High Voltage Probe Calibration Generators KHT 6000C
- The KHT 6000C is a calibration generator specifically designed for HF adjustment of high voltage probes and dividers.
- It generates square pulses with a voltage range of 500V to 6000V, adjustable in 1V steps.
- The device features a steep rising edge with a rise time of less than 45ns (10% to 90%).
- Users can operate the KHT 6000C manually or remotely via a PC using the integrated USB or optional GPIB interface.
- Key specifications include a voltage display resolution of 1V and a maximum load of 100pF.
High-Speed Differential Probe HSDP4010
- High Bandwidth Offers a bandwidth greater than 4 GHz, with 4.2 GHz typical.
- Differential Voltage Range Designed for a differential voltage range of ±8V (16Vpp).
- Low Noise Features low input-referred noise, less than 2 mV rms and 100 nV/sqrt(Hz) (preliminary).
- Fast Rise Time Has a rise time of less than 140 ps (preliminary).
- High CMRR Exhibits high Common Mode Rejection Ratio (CMRR) with >70 dB at DC, >50 dB at 1 MHz, >45 dB at 10 MHz, >35 dB at 100 MHz, >25 dB at 500 MHz and >25 dB at 1 GHz.
Holder for Probes 5-12mm
- Versatile holder for probes sized 5mm to 12mm
- Designed for SKID® positioning systems
- Included in some SKID Starter Kits (SKID-M, SKID-L)
- Enables precise probe positioning for testing and debugging
- Durable accessory to enhance SKID® system functionality
Interface power supply push/pull 1.5m
- 1.5 m interface cable for PMK active probes
- Reliable connection to compatible power supplies
- Push/Pull connector design for quick and secure attachment
- Durable high-quality construction for long-term use
- Provides flexibility and stable power delivery in test setups
Non-sellable single item of spring tip set
- Single spring tip from the PMK set, not sold individually
- Gold-plated for enhanced durability and reliable conductivity
- Fine tip suitable for precision and delicate tasks
- Intended as a replacement or spare for the full set
- Compatible with PMK soldering and testing tools
Optional probe single case in black with foam inlay for transport and storage Case BumbleBee
- Optional single probe case for BumbleBee series
- Durable black exterior for long-lasting use
- Foam inlay provides secure protection
- Compact and lightweight for easy transport
- Ideal for safe storage and professional mobility
Oscilloscope Probe PB470
- Switchable 1X / 10X attenuation for flexible use
- Wide compatibility with standard 1 MΩ oscilloscope inputs
- Capable of measuring up to 300 V RMS in 10X mode
- High signal fidelity with low capacitance and broad compensation range
- Durable build with 130 cm cable length for practical use
- Lightweight design at 55 grams
Oscilloscope Probe PB830
- 300 MHz bandwidth for high-frequency signal analysis.
- 10:1 attenuation ratio for accurate voltage measurements.
- 10 MΩ input resistance minimizes signal loading.
- CAT II 400V rating for safe use on low-voltage circuits.
- Replaceable spring hook tip for easy maintenance.
Oscilloscope Probe PB925
- Supports up to 2500 V DC + peak AC for high-voltage measurements
- Fixed 100:1 attenuation ratio for scaling large signals
- DC to 100 MHz bandwidth for accurate waveform capture
- 100 MΩ input resistance to minimize circuit loading
- CAT I insulation for high-voltage safety compliance
Placeholder for ajax description replacement
