Probe
®HORNET
High Voltage Differential
972-03-923-2277+
אין כלום בעגלה שלך.
High Voltage Differential
העיצוב הקומפקטי של סדרת הגששים PML, עם קוטר מעטפת של 2.5 מ"מ בלבד בקצה הגשש, אידיאלי למדידות על רכיבים זעירים ונקודות בדיקה שקשה להגיע אליהן. זאת משום שהוא מאפשר שדה ראייה טוב יותר בהרבה אל הרכיב הנבדק לעומת עיצובים סטנדרטיים של גששים בקוטר 5 מ"מ. קצה הגשש עצמו דק מאוד – רק 0.5 מ"מ, מצופה זהב ובעל קפיץ פנימי.
חיבור פרטני עם נאמנות אות גבוהה ביישומים שונים מובטח בזכות קצה קפיצי ניתן להחלפה ומגוון רחב של אביזרי מגע. במיוחד במדידות RF על מעגלים משולבים (IC) יש צורך בחיבור הארקה קצר ככל האפשר. קיימות אפשרויות חיבור באמצעות BNC וכן פתרונות הלחמה ללוחות PCB. התאמות סטנדרטיות יוצרות השראות נוספת ופעימות תהודה במעגל המדידה, עקב אורך החיבורים – מה שעלול לגרום לעיוות באות המדידה. כאן נכנס הפתרון החדשני של מערכת חיבור IC מסדרת PML, הכוללת 5 כיפות IC עבור מרווחי פינים של 0.5 מ"מ עד 1.27 מ"מ, להב הארקה חדשני ופד נחושת להדבקה על גבי המעגל, ומספקת פתרון אידיאלי למדידות מדויקות, ניתנות לשחזור ובטוחות מפני קצר חשמלי.
גששי ה-PML הפסיביים של PMK זמינים עם או בלי פונקציית קריאה חכמה (RO), הכוללת תקשורת אינטליגנטית עם התאמה אוטומטית של קנה המידה על גבי תצוגת האוסצילוסקופ.
כל הגששים עוברים כיול בסוף תהליך הייצור. תעודת כיול מפעל זמינה כאופציה.
The compact design of the PML probe series with only 2.5mm housing diameter at the probe tip is ideal for measurements on the smallest components and hard-to-reach measuring points, as it allows a far better view of the component under test than conventional 5mm probe housing designs. The actual probe tip is only 0.5mm thick, gold plated and spring loaded.
Individual contacting with high signal fidelity in different applications is ensured with the replaceable spring tip and a variety of contacting accessories. Especially for RF measurements at the IC a shortest possible ground connection is necessary. BNC and PCB solder-in solutions are available. Conventional adaptations cause additional inductance and resonance into the measurement circuit due to long leads and thus distort the measurement signal. This is where the innovative IC contacting system of the PML series, consisting of 5 different IC caps for pin spacing from 0.5mm to 1.27mm, the innovative ground blade and the copper pad for gluing onto the IC, offers the ideal solution for short-circuit-proof, reproducible and accurate measurements.
PMK's passive probes PML are available with or without intelligent read-out (RO) function, featuring intelligent communication with automatic scaling on the oscilloscope display.
All probes are calibrated at the end of production. A factory calibration certificate is optional.
At sem a enim eu vulputate nullam convallis Iaculis vitae odio faucibus adipiscing urna.
Reviews
There are no reviews yet.